Tag Line

"Built Dam Strong!"
Showing posts with label design. Show all posts
Showing posts with label design. Show all posts

25 September 2012

The 7 P's of preparedness.

"Proper Planning Prevents Piss-Poor Performance." 

That is something one of my sergeants in the Army was fond of saying. Why am I bringing this up? Before you do ANYTHING, have a plan. I don't mean "Have a plan that cannot change no matter what," as that is rigid, inflexible and will only lead to your head hurting. 

So, you want to build something. What purpose does the thing serve? What loads will it see? What functionality does the thing need to have? How much space will it take up? What are the size constraints for moving parts? Is weight a concern? 

All of these questions and more should be asked of yourself or your customer. Here you can see a pile of aluminum that was purchased after doing a CAD drawing with the express purpose of figuring out how much material to buy:


I got the saw horses out and laid out the first pieces to cut:


When you buy material, NEVER assume that lengths are the same:

If you were relying on these ends to all match up to make something square, you would fail horribly. NEVER ASSUME. ALWAYS MEASURE!

I marked the correct length on two sides of the box tube:


Chop chop!

Making good progress:

Stacking all the like parts together:

I was getting tired after a very long weekend full of lots of traveling and busy-ness, so I stopped cutting after I made most of the major cuts. The last thing I did was bust out the biiiiiig Sharpie:


And marked up all the surfaces I will be laying out lines for holes and trimming pieces to fit:

Ready for final layout in the morning:

13 September 2012

WIP (Work in Progress): Workbench frame design

One of the things that every garage/shop/workspace needs is a good workbench. What you are doing determines how you should build it. I've never built a wooden work bench before, but I've used a lot of them, for sure. Building a large workbench out of metal is pretty darn expensive, so wood provides a decent balance between durability and cost. The new garage I am getting settled into is in dire need of a workbench. Since the cost of materials is certainly a concern, I decided to get things draw out with SketchUp:



Things to note:
-I designed the front of the bench to be able to clamp things to it. Having a clamping lip is a HUGE benefit when you want to hold things without using your hands.
-The dimensions are 2'x8'. This will allow two sections of the bench to be made from one 4'x8' sheet of plywood for the top, one 2x6 for the support rails, and a few (I haven't counted yet) 2x4s. As it is now, with a 3/4" thick sheet of plywood on top, the height of the table is 38", which I think is a pretty comfortable height for me, since I am 5'10" tall.
-It has already been pointed out that while this design has pretty darn good compressive strength, the torsional rigidity is not so great. That is intentional. The next step of this project is to design four cabinets to fit under the bench, and these will be firmly attached to the bench to provide more stability. I intentionally designed the frame of the bench separate from the cabinets in order to make the whole system a lot easier to move around.

That's about it. I am sure the design will change a bit before we actually buy the materials.

I am really starting to like using SketchUp. It's not exactly what I could call intuitive, but, it works.